Showing posts with label bowl. Show all posts
Showing posts with label bowl. Show all posts
Thursday, February 20, 2014
Ever Put a Wooden Bowl in a Microwave Oven
Hi Everyone,
One of the enduring difficulties in turning unseasoned wood is the drying that occurs when a bowl or platter is turned. The turning exposes the grain of the wood and any water that is inside of the wood evaporates away. Sometimes, if the grain dries evenly, the bowl will retain its shape and not crack. But if the grain dries unevenly cracking and distortion of the sides of the bowl or the bottom of a plate can occur.
One way to get around this is to turn an unseasoned blank several times, each time removing a little more wood and then wrapping the bowl blank in heavy paper so it will dry slowly and hopefully evenly. And youve seen me do this many times. It can take 4-6 months for a large bowl to dry out this way and a long time for a project to come to completion.
Another way to dry out a bowl is to place it in a microwave oven and heat the wood up. This drives out the water in the wood and can speed up drying from months to 30 minutes. Thats the good news. The bad news is that it can cause the wood to rapidly dry out and distort, ruining the piece.
Ive never tried it before and since I have a small block of linden wood in the shop I decided to go down and turn the linden block into a natural edge bowl and to then take it into my kitchen and microwave it.
So heres what I did:
Here is a photo of the linden block. Its half of a large branch that Ive had for about 1 1/2 years or so and so Im going to turn it into a natural edge bowl. This is a bowl that still has some of its bark left on the edge:

This is about 90 minutes later. This type of turning produces a saddle-shaped bowl and you can see the shape beginning to form:


Here you can clearly see the saddle shape and the bark on the edge:

Here is the bowl after its had a session in the microwave. Its hot to the touch and very damp at this point but I dont see any cracking or obvious distortion. Ive placed it on my bread rack to dry and Im going to put it in front of an open window. Ill check back on it later today.

VW
Read More..
One of the enduring difficulties in turning unseasoned wood is the drying that occurs when a bowl or platter is turned. The turning exposes the grain of the wood and any water that is inside of the wood evaporates away. Sometimes, if the grain dries evenly, the bowl will retain its shape and not crack. But if the grain dries unevenly cracking and distortion of the sides of the bowl or the bottom of a plate can occur.
One way to get around this is to turn an unseasoned blank several times, each time removing a little more wood and then wrapping the bowl blank in heavy paper so it will dry slowly and hopefully evenly. And youve seen me do this many times. It can take 4-6 months for a large bowl to dry out this way and a long time for a project to come to completion.
Another way to dry out a bowl is to place it in a microwave oven and heat the wood up. This drives out the water in the wood and can speed up drying from months to 30 minutes. Thats the good news. The bad news is that it can cause the wood to rapidly dry out and distort, ruining the piece.
Ive never tried it before and since I have a small block of linden wood in the shop I decided to go down and turn the linden block into a natural edge bowl and to then take it into my kitchen and microwave it.
So heres what I did:
Here is a photo of the linden block. Its half of a large branch that Ive had for about 1 1/2 years or so and so Im going to turn it into a natural edge bowl. This is a bowl that still has some of its bark left on the edge:

This is about 90 minutes later. This type of turning produces a saddle-shaped bowl and you can see the shape beginning to form:

Here is the bowl after Ive hollowed it out. This took approximately an hour of turning. The wood is soft and even though Ive sanded it, its still has a ragged surface in places:

Here you can clearly see the saddle shape and the bark on the edge:

Here is the bowl after its had a session in the microwave. Its hot to the touch and very damp at this point but I dont see any cracking or obvious distortion. Ive placed it on my bread rack to dry and Im going to put it in front of an open window. Ill check back on it later today.

VW
The Blue House Bowl Discussion and plans
Hi Everyone,
Well, I decided to begin working on a bowl that I am planing on donating to a charity called the Blue House. This charity supports an orphanage in Uganda that takes in girls and young women who have been orphaned because of AIDS. Every year the ladies at my church have an annual craft fair to raise funds to support these young women. And yours truly donates cutting boards and other stuff for sale every year.
This year, amongst other things, I plan on donating a full-sized salad bowl to the sale and this blog posting will be the first in a series about how the bowl was made. I hope this will give people a window on how a large bowl is made and get them interested in the sale.
So, I have gotten a large 12"x3" white ash bowl blank and this is what I will be using for the bowl. The wood is unseasoned, meaning that it has a considerable amount of water in it and so we will be making a green wood turning and this adds several steps to our turning process, and certainly nothing that Selkie Wood Works cant handle! Heres what were going to do: Im going to mount the block on the lathe and completely turn the outside of it and partially turn the inside of it and leave the bowl about 1" thick. This is much thicker than a standard bowl and the reason Im doing this is this will help the bowl retain its round shape while its drying out. When we come back to the bowl in several weeks time, it should have dried out enough to allow me to finish turning and shaping it, and with any luck, it will be ready for the Blue House sale, which always takes place the first weekend in December.
So were off for another adventure in the wood shop. So make some coffee and stop by for photos and a complete process discussion on the Blue House bowl.
Best
VW
Read More..
Well, I decided to begin working on a bowl that I am planing on donating to a charity called the Blue House. This charity supports an orphanage in Uganda that takes in girls and young women who have been orphaned because of AIDS. Every year the ladies at my church have an annual craft fair to raise funds to support these young women. And yours truly donates cutting boards and other stuff for sale every year.
This year, amongst other things, I plan on donating a full-sized salad bowl to the sale and this blog posting will be the first in a series about how the bowl was made. I hope this will give people a window on how a large bowl is made and get them interested in the sale.
So, I have gotten a large 12"x3" white ash bowl blank and this is what I will be using for the bowl. The wood is unseasoned, meaning that it has a considerable amount of water in it and so we will be making a green wood turning and this adds several steps to our turning process, and certainly nothing that Selkie Wood Works cant handle! Heres what were going to do: Im going to mount the block on the lathe and completely turn the outside of it and partially turn the inside of it and leave the bowl about 1" thick. This is much thicker than a standard bowl and the reason Im doing this is this will help the bowl retain its round shape while its drying out. When we come back to the bowl in several weeks time, it should have dried out enough to allow me to finish turning and shaping it, and with any luck, it will be ready for the Blue House sale, which always takes place the first weekend in December.
So were off for another adventure in the wood shop. So make some coffee and stop by for photos and a complete process discussion on the Blue House bowl.
Best
VW
Sunday, January 26, 2014
Birch Bowl w foot
Birch Bowl w/foot9" x 3 - 3/4"
Subscribe to:
Posts (Atom)