fs
Showing posts with label one. Show all posts
Showing posts with label one. Show all posts

Thursday, February 20, 2014

A finish to one

Finished off the open handle this morning with a coat of Danish Oil, I have to say I feel really lucky that the JB Weld I decided to use worked great for filling the crack in the wood and strengthening it. Took it  for some test cuts last night and even pushed the pressure on the saw greater than I normally would have to, and the repair held up great. Man is this thing even nicer to cut with than before.

It gets me excited to get the other handle onto the Dovetail  blade I have, But that will require retoothing the blade first, I will have to do some research on that before I start. Anyhow just wanted to drop off the pics here and the note. Probably work more on the other saw this Saturday and youll see updates then.

Cheers
Oldwolf
Read More..

Monday, February 10, 2014

One More Bench And Ill Scream

When Christopher Schwarz started to build his recent Roubo workbench, I thought he was nuts. I appreciated it, because I have been mulling over the bench I want to build for a couple of years now, but I still thought he was nuts. Realistically, the guy has enough workbenches to fill a barn, yet here he was, building yet another one.

What didnt dawn on me at the time, but has caught up with me since, is the fact that Chris has a sixth sense when it comes to the average woodworking hobbyists quest for knowledge. If you think this is a bit of an overstatement, check out the flood of new posts on the web about benches, many added since Chris started his latest example. It is what I call, "the Schwarz bench tsunami".

Could I read one more post about the worlds most perfect workbench?

Absolutely not!

Could I write one?

You bet!

Heres the thing, my shooting board is coming together nicely. I have almost completed the prototype for the fence adjustment which I think is pretty cool, and it should be in the mail to DAEDWoRKs sometime this week. I have asked Raney to turn the final version for me, although I think he is a little skeptical that it will work. Now that I have a working model to prove he wont be wasting his time, I am hoping we can come to an agreement for its creation. Raney does amazing work with metal, his planes being what I consider to be hands above many of the others. If I can get him to agree to build it, I know his contribution to the board will make it incredibly special.

As I now have a handle on the project at hand, I can now start to think about the next one. I have chosen to build a workbench for three reasons. The first is the most obvious, you can only work without one for so long before you start to go batty. The second reason is because of the current project. This shooting board will probably become my most used tool, but with an overall size of 30" wide by 38" deep, it is a huge sucker. It is designed to mount on its own stand, but until residences change, room for that to happen will have to wait so it, at least, needs a bench to sit on. Finally, I have been going through the processes of what I want in a workbench for at least three years now, so it is about time.

The result of all of this is...


If working on a folding WorkMate these past few years has taught me nothing, at least I have learned that no matter what, a bench needs weight. My planes and I have chased that little sucker around the room long enough, thank you very much. But how do you add weight when you dont want a huge bench? Not to mention not wanting to break the bank?

My first idea was to add storage for tools under the bench. I would think that is the quickest and most economical way to add some serious weight to anything; fill it up with what you already have. I threw this idea out the window in a heartbeat, mainly because of a bench my old man and I built years ago.

The old man got this brainwave that searching for fasteners was a waste of time, especially if you could have them right were you need them - at the bench. He came up with this design for a bunch of bins along the bench front, and when we were done building it, we had a bench with three rows of eight bins, each of which tipped out to reveal what they contained. Needed a #8 by 1 1/2 screw? No problem; middle row, forth bin from the left. It really was an ingenious system, except for one thing; every time you reached in one of those bins for a screw, nail or dowel, you came up with a hand full of sawdust and shavings. Because the bins didnt seal, every bit of trash produced on top of the bench ended up in them.

I learned very quickly to hate any bench that wasnt open to the floor as you just couldnt keep them clean. My old shop had two benches and not only were both open to the floor, but their stretchers were placed a foot off the floor so I could get the ShopVac head in to clean underneath them properly. There is nothing worse than dust-catchers in a shop.

After selling the house and moving on the boat, I inherited a whopping big bench that someone had left in the yard years earlier and it had the same arrangement; a top, four legs and four stretchers. It was a great big old thing that had sat out in that yard for years and was so full of moisture that it would never dry out, but man, it weighed a ton.

I then ended up sharing a shop with a friend. He had built his benches with a shelf under each to store everything from tools to garden paraphernalia. What a mess. You just couldnt keep anything clean, no to mention find anything.

Hence, storage under a bench was definitely out, or was it?

A month or so ago I was doing some cooking in the kitchen and grabbed a knife from the drawer. When I hit the drawer face with my hip to close it, the nickel dropped.

When I put this kitchen together, I used self-closing slides for all the drawers. Checking out the Valley site, I discovered that they sold dampeners for spring loaded doors as well. If the drawers and doors cant stay open, and they have a relatively good seal when closed, I can store tools under a bench and not have to worry about the drawers and cupboards filling up with bench top waste.

Sounds like a plan to me.


Peace,

Mitchell
Read More..

Saturday, January 25, 2014

Two is better than one


Veritas Dual Marking Gauge

When I first starting using the new, Veritas Dual Marking Gauge late last fall I wasn’t sure how often I’d actually use both sides of the gauge at once. Up until that point I used a single type gauge. Through the first week in use I generally used only one of the adjustable rods and it wasn’t until I made it a mental point to try using both rods that the fog lifted.
Two is truly better than one. Once I trained my brain to think about the dual settings I found myself using them both all of the time. Well at least whenever it was called for in the work.
For stringing, this thing is the cat’s meow. Set the desired width and scribe both sides of the line. Perfect.
For grooves and dovetails as well as most of my mortise and tenon work, the dual marking gauge is the way to go. It saves me a step or two and with all things  that need to be measured, that saved step usually means one less step to make an error.
The gauge has a large reference surface that makes scribing lines easy and effective with large brass screws to lock things in place.

Optional Shaft Clamp

Just recently, Veritas introduced a small accessory to this already excellent tool.   The optional shaft clamp. This little clamp slides over the rods and will lock a setting in place. This was extremely useful just the other day when I was setting some stringing into a few furniture components. The stringing was all the same width but the offset from the edge changed.
The shaft clamp held the width of the cutters in place while I adjusted the offset from the gauge body. Nice!
It’s always the little details that make good tools great and Veritas has done it again with the Dual Marking Gauge and optional Shaft Clamp.
Try one out for yourself and you’ll wonder how you ever got along with only one!
Cheers~

Read More..