fs
Showing posts with label more. Show all posts
Showing posts with label more. Show all posts

Monday, March 3, 2014

And still more router tables!

Paul Homes tells me the router tables with the pivoting fences are quite popular in Australia. He clued me into Gifkins, a web site that not only sells specialty jigs, but has free plans for a router table you can make yourself.(PDF) 


Next, head over to Martin Popes blog where he describes how he built his inexpensive router table. Check out his method for raising and lowering the router:
My low tech solution was two blocks of wood with a 45ish degree angle cut between them. A long slit was cut in one block into which a long bolt was passed through into a nut at the rear. As the bolt is turned it closes the blocks together which raises the router, screwing out the bolt lowers the router.
***


Mere Minutes




And now some more router tables!

******
Shawn Graham

Heres another router table for under $20. Shawn made this one from poplar with a plexiglass insert.







Erik van Baarle

A router table from the Flemish part of Belgium! Heres a good idea for the small shop. A bench-top router table that easily stores away. (Hey, thats my Workmate!)




Eddie Antley

This is one of the biggest router tables Ive seen. Looks like it doubles as a workbench.



Read More..

Monday, February 10, 2014

One More Bench And Ill Scream

When Christopher Schwarz started to build his recent Roubo workbench, I thought he was nuts. I appreciated it, because I have been mulling over the bench I want to build for a couple of years now, but I still thought he was nuts. Realistically, the guy has enough workbenches to fill a barn, yet here he was, building yet another one.

What didnt dawn on me at the time, but has caught up with me since, is the fact that Chris has a sixth sense when it comes to the average woodworking hobbyists quest for knowledge. If you think this is a bit of an overstatement, check out the flood of new posts on the web about benches, many added since Chris started his latest example. It is what I call, "the Schwarz bench tsunami".

Could I read one more post about the worlds most perfect workbench?

Absolutely not!

Could I write one?

You bet!

Heres the thing, my shooting board is coming together nicely. I have almost completed the prototype for the fence adjustment which I think is pretty cool, and it should be in the mail to DAEDWoRKs sometime this week. I have asked Raney to turn the final version for me, although I think he is a little skeptical that it will work. Now that I have a working model to prove he wont be wasting his time, I am hoping we can come to an agreement for its creation. Raney does amazing work with metal, his planes being what I consider to be hands above many of the others. If I can get him to agree to build it, I know his contribution to the board will make it incredibly special.

As I now have a handle on the project at hand, I can now start to think about the next one. I have chosen to build a workbench for three reasons. The first is the most obvious, you can only work without one for so long before you start to go batty. The second reason is because of the current project. This shooting board will probably become my most used tool, but with an overall size of 30" wide by 38" deep, it is a huge sucker. It is designed to mount on its own stand, but until residences change, room for that to happen will have to wait so it, at least, needs a bench to sit on. Finally, I have been going through the processes of what I want in a workbench for at least three years now, so it is about time.

The result of all of this is...


If working on a folding WorkMate these past few years has taught me nothing, at least I have learned that no matter what, a bench needs weight. My planes and I have chased that little sucker around the room long enough, thank you very much. But how do you add weight when you dont want a huge bench? Not to mention not wanting to break the bank?

My first idea was to add storage for tools under the bench. I would think that is the quickest and most economical way to add some serious weight to anything; fill it up with what you already have. I threw this idea out the window in a heartbeat, mainly because of a bench my old man and I built years ago.

The old man got this brainwave that searching for fasteners was a waste of time, especially if you could have them right were you need them - at the bench. He came up with this design for a bunch of bins along the bench front, and when we were done building it, we had a bench with three rows of eight bins, each of which tipped out to reveal what they contained. Needed a #8 by 1 1/2 screw? No problem; middle row, forth bin from the left. It really was an ingenious system, except for one thing; every time you reached in one of those bins for a screw, nail or dowel, you came up with a hand full of sawdust and shavings. Because the bins didnt seal, every bit of trash produced on top of the bench ended up in them.

I learned very quickly to hate any bench that wasnt open to the floor as you just couldnt keep them clean. My old shop had two benches and not only were both open to the floor, but their stretchers were placed a foot off the floor so I could get the ShopVac head in to clean underneath them properly. There is nothing worse than dust-catchers in a shop.

After selling the house and moving on the boat, I inherited a whopping big bench that someone had left in the yard years earlier and it had the same arrangement; a top, four legs and four stretchers. It was a great big old thing that had sat out in that yard for years and was so full of moisture that it would never dry out, but man, it weighed a ton.

I then ended up sharing a shop with a friend. He had built his benches with a shelf under each to store everything from tools to garden paraphernalia. What a mess. You just couldnt keep anything clean, no to mention find anything.

Hence, storage under a bench was definitely out, or was it?

A month or so ago I was doing some cooking in the kitchen and grabbed a knife from the drawer. When I hit the drawer face with my hip to close it, the nickel dropped.

When I put this kitchen together, I used self-closing slides for all the drawers. Checking out the Valley site, I discovered that they sold dampeners for spring loaded doors as well. If the drawers and doors cant stay open, and they have a relatively good seal when closed, I can store tools under a bench and not have to worry about the drawers and cupboards filling up with bench top waste.

Sounds like a plan to me.


Peace,

Mitchell
Read More..

Thursday, February 6, 2014

more cockatoo chairs

these two left for boston yesterday ...
ok, heres the challenge ... make a windsor chair out of metal ... the backs legs and bow are made on a home made form of angle iron and plywood, loosely based on one of my chair back bending forms. the back legs and top rail are one continous piece of 3/8ths solid steel rod, bent slowly, by heating a section at time with a handheld acetylene torch. the rounded seat frame is bent the same way and welded on its own form. ditto for the front legs .
sam made these four chairs back in 2009 but we never documented the tricky part, drilling the holes in the back rails. so, sam when asked me for a refresher course, i decided to document it for him this time ... i started out as a windsor chair maker back in 1980 and i have made my share of them. i wont say how many as i know you probably wont believe me ...
we kept the original prototype luckily, and sam used it to make comparisons as he went along. there are no drawings of this chair so it was also helpful for laying out the spindle and cage and perch spacings on the new chairs ...
the first step is to mark out and drill the holes in the midrail, but only halfway through ... it is really important to buy yourself some brand new cobalt drill bits for this task as the bow steel is hardened a bit by the heating and bending/shaping process. in the photo two photos above, the spindles are inserted in the mid rail and used to sight the hole angles as you are drilling the top rail. for sure an old windsor drilling trick. when drilling these holes, you want to start small, like an 1/8th", and ALWAYS start perpendicular to the bow curve ... once you get started, gradually change your angle until it points where you want it to go .. a little dab of 3 in 1 oil about halfway through the 18th" hole never hurts. after the 1/8th", then follow with a 3/16ths", which, in this case, was the final spindle size ... see the video below of enlarging an 1/8th" hole to a 3/16ths ... sometimes the start is a little tricky ..

im testing loading a video directly to my blog rather than putting it on you tube with a link ... let me know what you think ... better? worse? dont watch videos? dont care? thanks ...
sam fabricated and welded on the little metal feet and painted the waterjetted cockatoos with glossy enamel house paint. trevor did the seats in the clients outdoor worthy fabric ...
all for now ...
Read More..

Wednesday, February 5, 2014

More on the Old Spool


Not too long ago I posted about an old wooden spool that I had picked up.

Recently, a reader sent me a picture of a very similar spool from his dads tool box. This one was not being used as a chalk line - but was partnered with a plumb bob. Hmm.

What I particularly like is the neat way that the bob is easily attached or unattached to the line. Of course, Im not sure why you would need to do that, unless it was to keep the line available for other uses.

Maybe, say, as a chalk line?

Heres the picture - thanks Ken!


He also wondered if the spools were actually part of the packaging for the line, and were then just repurposed by the owner:

"I have since wondered if the spool was sold with cord, twine or rope coiled on it much like the plastic spools used today. Then frugal(cheap) carpenters just kept it in their toolbox."

Its an interesting idea, and one that never crossed my mind before! If this was the case, it should be possible to find out by looking at old catalogs and such...


Read More..

Tuesday, January 28, 2014

The executive desk Monclova Oh more drawers!

Ive finished the drawers today! Here are the pics of all 7 drawers. These will be finished with a clear coat of poly to seal the wood and give long life. Tomorrow Ill make the drawer faces, and that portion will be complete.




Read More..

Friday, January 24, 2014

Petersburg Mi Installing more cherry

Here are the latest pictures from the cherry bookcase/fireplace surround. This is the left side of the unit, which is going to be a small storage area for blankets, fireplace accessories, etc. Its starting to take shape now!
This week I expect to be working on the base cabinets to the right of the fireplace, so I can move on to the upper bookcase area.
More to come - stay tuned!


Read More..