fs
Showing posts with label making. Show all posts
Showing posts with label making. Show all posts

Monday, February 10, 2014

Making A New Turning Saw Part III


It was time to refine the shape of the new saw; making it lighter both visually and physically. Most of the work was done on the shavehorse, but some work was done over at the bench vise. The tools used were: drawknife, spokeshaves, files, and a knife. The work was slow but fun.

Heres the beginning of the shaping process on the shavehorse:


I just shaped it by eye. The hardest part was not taking off too much - its addicting!


Some sections were easier to work on at the bench with the piece held in the front vise:


I ended up taking off quite a bit of stock. The areas around the mortise and the bottom of each arm I kept close to full thickness. Here are some comparison shots between the unshaped arm and the mostly finished arm:




After shaping the two arms with rounded, curving surfaces, the stretcher looked out of place with its flat surfaces and beveled edges. I decided to rework it to more closely match the arms. Heres two shots of all three pieces, with most of the shaping work complete:




And a shot of the assembled frame surrounded by the tools that have been working on the shaping:



Next up are the tension device (easy) and the blade assembly (not too hard, except I have this new idea on how to attach the rods to the knobs without using epoxy) so maybe this will be a four part post. Probably shouldnt have said that...


Read More..

Monday, January 27, 2014

Making a simple bench

Here are some pictures of a bench Ive made over the past two days. Ive made similar benchs of this type, which are typically called Carpenters Benches, but are sometimes used for everyday use in mudrooms, etc. The design is simple, yet very effective, and makes for a sturdy and rigid bench. This one measures 48" wide. It will be painted and used in a common area of the customers home.




Read More..