Showing posts with label on. Show all posts
Showing posts with label on. Show all posts
Friday, February 21, 2014
My Take on Starting to Carve Part Two
This is my pair of pennies on starting to carve. In the first installment HERE I wrote about acquiring the chisels. Once you have a few chisels to work with and youve spent a little time playing with them you start to develop an appetite to carve something.

Read More..
There is a lot of wood carving instruction out there, both online and in print form. If I peruse the magazine racks of my local Barnes & Noble at the right day of the month I can even find a couple different magazines dedicated to carving. The pages are filled with carving this garden gnome or that type of green man face and I, personally, could not be less interested. Three dimensional carving or carving in the round or whatever you want to call it, just was never the kind of thing I was after.
Back when I was young and eating art classes with a ravenous appetite, I always disliked when we the class would head into mixed media sculpture land. Making three dimensional representations of this weeks existential dilemma wasnt exciting (I know, I know, how ever did I end up with an avocation towards woodworking? I can sum that up in a word, UTILITY) My love was drawing, painting to some extent, but mostly drawing. Taking a flat space and making the thoughts and ideas spring off the page into the air was much more satisfying than creating something that was already toddling around its emotional baggage in real space and time.
So when I was starting to be drawn towards carving, I was not tempted to turn a chunk of bass wood into a pink elephant with polka dot pants and sad looking eyes. I sought to recreate that drawing experience on the flat surfaces of my work. Only instead of a pencil or charcoal stub, I would use sharp chisels to draw with shadow and light.


The carved elephants and garden gnomes of the world look the same all throughout the day. put them in direct light, put them in shadow, it makes little difference. But have a piece of chip carving or the like in your room and it will look different through out the day. Whether its the morning light striking it face through the window or the dim shadowed photons of your bedside reading lamp in the evening. The carvings have a different personality depending on where the light is. They tell a different story in different apertures. It makes them challenging to photograph too.
So if you are attracted by carving styles other than mine, my advice is to find an experienced instructor whose work speaks to you and flatter them through mimicry. But dont just recreate their finished work. That will teach you something, but not everything. Try and recreate their methods of work. Find some video of them working and study their posture, their hand holds, their rhythm. Stalk them like youre an F.B.I. profiler and theyre the next Son of Sam. As your body and muscles learn you will begin to adapt what you see into your own style of work. When you find yourself naturally moving off the script, then you are headed into your own creative space, and that should be where you want to be.

I have stolen bits and pieces from a lot of different collaborators this far down my path but I can boil down the major influences into three people.
The first is pretty obvious. Peter Follansbee. When I first found his blog and saw his carvings I thought to myself, Now theres a guy who is carving exactly the things I want to carve and doing it the way I imagined it could be done. I started on my own with my first two chisels and following both Peters words from his blog and some video people had shot of him demonstrating. I have to say in most things I find woodworking videos to be lacking but I cannot think of a different media that would translate the process of carving better than video. My first suggestion is you go out and buy Peters video "17th Century New England Carving" This video solidified the basics that I was trying to learn. It taught me how to look at a pattern and break it up into the moves I needed to reproduce the work.
This video was very important to my initial development. After getting it the next steps were to start carving like a mad man. Practice Practice Practice so they say. Peter has a second video on "S" curves in work, I dont have that one - yet - so I cant speak to it per say, Im positive its just as excellent as his first, so if you want order both, but for sure order the first one.

Then after a while I was forced from my 17th century comfort zone. A client wanted something representing the ocean carved on the inside of a box. I struggled to find a solution until inspiration made me think of a shell. I had never carved a shell before but I knew where to go to get the help I needed. I went right to the teachings of Mary May. A fantastic woodcarver who has a lot of experience working and teaching. I first became aware of her watching an episode of The Woodwrights Shop where she carved an acanthus leaf for St. Roy. Since then I have found her blog and even more of her work. She is an inspiration for me at every turn.
She has DVDs for sale on her site, and even better, shes opened an online woodcarving school that you can attend anytime. She also has an article in the most recent Popular Woodworking Magazine on carving acanthus leaves on a bedpost. Even before this article conquering the acanthus was starting to become an obsessive thought for me. Now Im going to have to stop studying and start cutting wood.
My last person is a carving hero to me because she is the master of a style I havent managed to dive into yet, but do desperately long to. Kari Hultman writes her blog over at The Village Carpenter and besides being just a sweetheart of a person in general, she is an excellent chip carver. I havent picked up a set of knives and tried it yet, (though I have been drooling over the ones Ron Hock has for sale) Ive seen Kari do a great intro to chip carving video and I always like seeing her work. I have to admit, Im not sure I would have considered chip carving if it wasnt for her.
So there are my inspirations and foundations - now go out and discover your own, they may surprise you. Next time well talk about inspiration and how I move through the carving process.
Ratione et Passionis
Oldwolf
Back when I was young and eating art classes with a ravenous appetite, I always disliked when we the class would head into mixed media sculpture land. Making three dimensional representations of this weeks existential dilemma wasnt exciting (I know, I know, how ever did I end up with an avocation towards woodworking? I can sum that up in a word, UTILITY) My love was drawing, painting to some extent, but mostly drawing. Taking a flat space and making the thoughts and ideas spring off the page into the air was much more satisfying than creating something that was already toddling around its emotional baggage in real space and time.
So when I was starting to be drawn towards carving, I was not tempted to turn a chunk of bass wood into a pink elephant with polka dot pants and sad looking eyes. I sought to recreate that drawing experience on the flat surfaces of my work. Only instead of a pencil or charcoal stub, I would use sharp chisels to draw with shadow and light.
The carved elephants and garden gnomes of the world look the same all throughout the day. put them in direct light, put them in shadow, it makes little difference. But have a piece of chip carving or the like in your room and it will look different through out the day. Whether its the morning light striking it face through the window or the dim shadowed photons of your bedside reading lamp in the evening. The carvings have a different personality depending on where the light is. They tell a different story in different apertures. It makes them challenging to photograph too.
So if you are attracted by carving styles other than mine, my advice is to find an experienced instructor whose work speaks to you and flatter them through mimicry. But dont just recreate their finished work. That will teach you something, but not everything. Try and recreate their methods of work. Find some video of them working and study their posture, their hand holds, their rhythm. Stalk them like youre an F.B.I. profiler and theyre the next Son of Sam. As your body and muscles learn you will begin to adapt what you see into your own style of work. When you find yourself naturally moving off the script, then you are headed into your own creative space, and that should be where you want to be.
I have stolen bits and pieces from a lot of different collaborators this far down my path but I can boil down the major influences into three people.
The first is pretty obvious. Peter Follansbee. When I first found his blog and saw his carvings I thought to myself, Now theres a guy who is carving exactly the things I want to carve and doing it the way I imagined it could be done. I started on my own with my first two chisels and following both Peters words from his blog and some video people had shot of him demonstrating. I have to say in most things I find woodworking videos to be lacking but I cannot think of a different media that would translate the process of carving better than video. My first suggestion is you go out and buy Peters video "17th Century New England Carving" This video solidified the basics that I was trying to learn. It taught me how to look at a pattern and break it up into the moves I needed to reproduce the work.
This video was very important to my initial development. After getting it the next steps were to start carving like a mad man. Practice Practice Practice so they say. Peter has a second video on "S" curves in work, I dont have that one - yet - so I cant speak to it per say, Im positive its just as excellent as his first, so if you want order both, but for sure order the first one.
Then after a while I was forced from my 17th century comfort zone. A client wanted something representing the ocean carved on the inside of a box. I struggled to find a solution until inspiration made me think of a shell. I had never carved a shell before but I knew where to go to get the help I needed. I went right to the teachings of Mary May. A fantastic woodcarver who has a lot of experience working and teaching. I first became aware of her watching an episode of The Woodwrights Shop where she carved an acanthus leaf for St. Roy. Since then I have found her blog and even more of her work. She is an inspiration for me at every turn.
She has DVDs for sale on her site, and even better, shes opened an online woodcarving school that you can attend anytime. She also has an article in the most recent Popular Woodworking Magazine on carving acanthus leaves on a bedpost. Even before this article conquering the acanthus was starting to become an obsessive thought for me. Now Im going to have to stop studying and start cutting wood.
My last person is a carving hero to me because she is the master of a style I havent managed to dive into yet, but do desperately long to. Kari Hultman writes her blog over at The Village Carpenter and besides being just a sweetheart of a person in general, she is an excellent chip carver. I havent picked up a set of knives and tried it yet, (though I have been drooling over the ones Ron Hock has for sale) Ive seen Kari do a great intro to chip carving video and I always like seeing her work. I have to admit, Im not sure I would have considered chip carving if it wasnt for her.
So there are my inspirations and foundations - now go out and discover your own, they may surprise you. Next time well talk about inspiration and how I move through the carving process.
Ratione et Passionis
Oldwolf
Tuesday, February 18, 2014
My Take On The Tool Rack
I decided to build a project for my new shop, Im not in the shop yet, but I was too excited to hold back. I settled on the Tool Rack Chris Schwarz published as an "I Can Do That" project in Popular Woodworking a while back. Like every idea I steal borrow from someone else, I have to tweak things a little to make them feel like their my own. I call the process narcissism creativity.
I had to change the look of the sides, I just wasnt happy with the elongated ogee on the original. I used a couple of sectors to lay out a federal period crown moulding profile and I was happy with the results. (You can read about the process HERE) After I was done I realized I could have worked the stock to exclude the big knot in the board. I started with including it because if there has to be a knot I want it contained within the piece, not riding the edge.
I like knots, they can bring a visual interest to the piece, I plan around them when I can but I dont shy away from them unless Im carving. What I dont like is when a joint line or board edge bisects across a knot. Half a knot is not attractive.

To cut them together on the band saw I used some drywall screws to pin both sides together. Ahgast and horror at making these unsightly holes in a piece, especially where the bevels under the screw head mar the wood further. I know, but never fear, three of the four screw heads went into areas that would be waste. The prominent one up front is where I planned to drill a hole for a peg, The other two fell into areas to be removed for the joinery of the back and tool board. The only blemish left would be along the back edge on top. Building it for someone else and I would fill it. Since this is a shop piece, Ill be happy to leave it alone.

After sawing them out, I kept the sides screwed together while I cleaned up the saw lines by rasp and by scraper.

Then I drilled through mortises for the tool board and a space for the back board was sawn out.

Then I could separate the twins.

I pinched them back together with a couple clamps, (because I forgot this part) and sawed a couple through tenons to fit through the top shelf. Joining the top shelf with a dado and wedged through tenons.
.JPG)
I cut my dado into the top shelf using a stair saw and chisels. Then I used the sides to line up where to drill and chisel all the way through.
.JPG)
.JPG)
I did a dry fit assembly and surveyed my work. The sides were good but there was something missing. I thought about Peter Follansbees tool chest, and not only the painting on the outside, but how he had used some scraps of carving demos for the shelf rails on the inside. (You can read about that HERE) I had already built my tool chest by the time I saw what he had done and I was sorry I hadnt thought of the same thing. I decided to not let another opportunity pass me by.

I laid out a quick pattern of interconnecting circles, thanks to George Walker Ive come to know this as a Guilloche pattern. Its become one of my favorite carving themes. After carving out the circles I carved out a pattern of swirls and flowers to fill the rounds.
.JPG)
Pine does not like to be carved. It is much more challenging than oak and getting a crisp line can be difficult between the winter wood and the summer wood. The carvings turned out a little rough, but over all Im ok with that. Over all they look good together, and again, this is for my shop.
.JPG)
I got the glue up in and after letting it set up I was able to balance the tool rack on the bench top to see how things might look eventually.
Now I was down to the pegs. but well save those for next time.
Ratione et Passionis
Oldwolf
Read More..
I had to change the look of the sides, I just wasnt happy with the elongated ogee on the original. I used a couple of sectors to lay out a federal period crown moulding profile and I was happy with the results. (You can read about the process HERE) After I was done I realized I could have worked the stock to exclude the big knot in the board. I started with including it because if there has to be a knot I want it contained within the piece, not riding the edge.
I like knots, they can bring a visual interest to the piece, I plan around them when I can but I dont shy away from them unless Im carving. What I dont like is when a joint line or board edge bisects across a knot. Half a knot is not attractive.
To cut them together on the band saw I used some drywall screws to pin both sides together. Ahgast and horror at making these unsightly holes in a piece, especially where the bevels under the screw head mar the wood further. I know, but never fear, three of the four screw heads went into areas that would be waste. The prominent one up front is where I planned to drill a hole for a peg, The other two fell into areas to be removed for the joinery of the back and tool board. The only blemish left would be along the back edge on top. Building it for someone else and I would fill it. Since this is a shop piece, Ill be happy to leave it alone.
After sawing them out, I kept the sides screwed together while I cleaned up the saw lines by rasp and by scraper.
Then I drilled through mortises for the tool board and a space for the back board was sawn out.
Then I could separate the twins.
I pinched them back together with a couple clamps, (because I forgot this part) and sawed a couple through tenons to fit through the top shelf. Joining the top shelf with a dado and wedged through tenons.
I cut my dado into the top shelf using a stair saw and chisels. Then I used the sides to line up where to drill and chisel all the way through.
I did a dry fit assembly and surveyed my work. The sides were good but there was something missing. I thought about Peter Follansbees tool chest, and not only the painting on the outside, but how he had used some scraps of carving demos for the shelf rails on the inside. (You can read about that HERE) I had already built my tool chest by the time I saw what he had done and I was sorry I hadnt thought of the same thing. I decided to not let another opportunity pass me by.
I laid out a quick pattern of interconnecting circles, thanks to George Walker Ive come to know this as a Guilloche pattern. Its become one of my favorite carving themes. After carving out the circles I carved out a pattern of swirls and flowers to fill the rounds.
Pine does not like to be carved. It is much more challenging than oak and getting a crisp line can be difficult between the winter wood and the summer wood. The carvings turned out a little rough, but over all Im ok with that. Over all they look good together, and again, this is for my shop.
I got the glue up in and after letting it set up I was able to balance the tool rack on the bench top to see how things might look eventually.
Now I was down to the pegs. but well save those for next time.
Ratione et Passionis
Oldwolf
Tuesday, February 11, 2014
Door Hinges on the Bastard Wall Cabinet
![]() |
| The Bastard Cabinet: Now with Hinges! |
It’s been far too long since I’ve worked (or blogged about) the Bastard Wall Cabinet. To be honest, nothings been done on the cabinet since my last post about it on March 22, 2011. That is, nothing until today. Keeping my head down and finishing my work homework on Saturday afternoon meant that I was actually able to steal a whole hour in the shop on Sunday.
I’m up to fabricating and installing the cabinet doors. As they will be relatively dimensioned, just like every other cabinet component, I decided to install the hinges first so that I can exactly mark the size of the doors.
I’m using Rockler Partial Wrap Slotted Piano Hinges. Though the brass platting breaks my usual chrome and brushed nickle aesthetic, these hinges are wonderful for doors made of sheet goods. The partial wrap means that on the door I’ll be screwing into both face and end grain so there’s no worry about screw holding power as there would be if I was only attaching to the end grain.
![]() |
| The hinges clamped in place, ready for marking. |
I began by laying the hinges against the cabinet sides where they will be installed and marking them (I marked them on blue tape to make the pencil line easier to see). I used a try square to mark perpendicular to the hinge barrel. Then I took the hinges over to my bench, clamped them down and went to work with a fresh hack saw blade. That sized them right. A few quick passes with a file and the cut ends were nice and smooth.
![]() |
| Using relative dimensioning to position the hinges. |
To install the hinges I began by fitting a scrap of ¾” baltic birch plywood (my door material) into the hing and setting it so that the scrap was flush with the end of the side panel as the final door should be. I then slid a temporary fence against the inside edge of the hinge and clamped the fence on. Once I removed the scrap door spacer, opened and clamped the hinge against the temporary fence, I was ready to install. I used a centering bit to pre-drill and then used an extra long bit in my screw gun to prevent the body of the screw gun from hitting the fence. I set the torque nice and low and each screw went in without a fuss.
In testing, the hinges seem to be working fine. Next I’ll re-mount the plane shelf (I forgot to account for door & hinge clearance when installing it) and then it’s on to doors. Hopefully this cabinet will be up on the wall soon.
Have you stolen and shop time lately?
Other Bastard Wall Cabinet Posts
Winter Wall Cabinet Wonderland
The Bastard Wall Cabinet (for tools!)
Trudging Towards Tool Storage
Cutting the Cabinet Carcass (in relative terms)
A Home For My Planes
Continued Wall Cabinet Assembly
Whats a Bastard Wall Cabinet without Shelves?
Winter Wall Cabinet Wonderland
The Bastard Wall Cabinet (for tools!)
Trudging Towards Tool Storage
Cutting the Cabinet Carcass (in relative terms)
A Home For My Planes
Continued Wall Cabinet Assembly
Whats a Bastard Wall Cabinet without Shelves?
Boxing in the Bastard Tool Cabinet
Monday, February 10, 2014
I finally made some progress on the New Yankee Workshop workbench
I started the workbench build back at the beginning of the year by cutting all the 2x4s down to length. My wife bought me a dado stack for christmas so I was good to go on the workbench. It turns out that the dado stck will not fit with the standard insert on my tablesaw. I was kind of expecting that but I was unable to find any other inserts for my saw on the Skil site so I decided to make my own. I have been putting if off in favor of other projects but I finally got it done and was able to start using my dado stack. Correction, I was able to start using 1/2" of my new dado stack. It turns out that the arbor on my saw will only safely hold 1/2". Its better than using a sungle blade and I was excited to finally get to use it. I got all the dados and rabbits for the base frame cut and plan on pre-drilling, screwing, and glueing the base together tomorrow.


















Read More..
I measured and marked all the pieces for their rabbits and dados.

I also marked the fronts of the boards so that I could see where to cut it on the tablesaw.

My homemade insert has a little bit of play in it so I creeped up on the proper cutting depth.

Testing the depth of the cut.

The dados and rabbits for the top of the base frame are done.


I made quite a bit of sawdust and wood chips.

I made a sacrificial fence from some scrap 2x4s.

This is the rabbit for the bottom tool tray.

I had one dado to cut in the long center piece. My homemade insert was moving around on me a little so I duct taped it down where the clip would be on the normal insert. The design of the saw is kind of funky and there is no easy way to make a clip for that section. I am writing an article on the insert and will explain more there.

More shots of the cut pieces.


I read the directions incorrectly and made this rabbit 3/4" too long. I cut a new piece of 2x4 and made remade this piece. Twice. I got in too much of a hurry and made the rabbit and dado on the same side. Im glad that I bought an extra 2x4 for this project.

The dados for the dogs need to be cut at a 4 degree angle so I cut a scrap 2x4 at 4 degrees on the mitre saw to use for marking all the cuts.

I marked the cutoff in the center and used it for the width marks.

I used that same block to set the proper angle on the mitre gauge for my table saw.

The slots for the dogs are not perfect but turned out better than expected.

Here is the final dry fit!

Wednesday, February 5, 2014
More on the Old Spool
Not too long ago I posted about an old wooden spool that I had picked up.
Recently, a reader sent me a picture of a very similar spool from his dads tool box. This one was not being used as a chalk line - but was partnered with a plumb bob. Hmm.
What I particularly like is the neat way that the bob is easily attached or unattached to the line. Of course, Im not sure why you would need to do that, unless it was to keep the line available for other uses.
Maybe, say, as a chalk line?
Heres the picture - thanks Ken!

He also wondered if the spools were actually part of the packaging for the line, and were then just repurposed by the owner:
"I have since wondered if the spool was sold with cord, twine or rope coiled on it much like the plastic spools used today. Then frugal(cheap) carpenters just kept it in their toolbox."
Its an interesting idea, and one that never crossed my mind before! If this was the case, it should be possible to find out by looking at old catalogs and such...
Tuesday, January 28, 2014
When You Know Youre Working On The Right Job

Some folks just have to do an extra special job no matter what it is theyre doing. We just finished installing the library cabinets in the previous post and I knew I was working on a classy jobsite when I visited the porta potty ... Landscaped and everything ... I missed the best shot yesterday before they dug the trench for the electric. I have photoshopped in the original gate post .... Nothing but first class all the way .... And, the finest porta potty yet ... spanking clean with a Purell hand sanitizer dispenser ... Click the picture ...
Sunday, January 26, 2014
Slow Progress on the Candle Rack
Every fall I think the start of the school year has got to be the craziest time of the year. And every spring I change my mind. Hands down, the end of the school year is the craziest time. It seems like every minute has at least an hours worth of work to get done.
So after spending four hours of a beautiful Sunday in my stuffy classroom (the air circulation is shut off on weekends), I came home and hid in the shop for about an hour. It wasnt much, but I did make some progress on the candle rack.
First, I had to remember what I was working on - finishing the dovetails. Then I had to double check that I was working with the right parts in the right orientation. All stuff that just takes care of itself when you arent breaking your project up into tiny amounts of time spread over weeks.
I did the layout on the tops of the sides by eye. If you look closely, you can see that I changed my mind a couple of times:

After cutting the tails, I transferred the layout to the pin board, cut it out and what do you know? It went together the first time:

It was fun to see the case for the rack coming together:

Not much progress, but better than nothing. And a nice hour in the shop with something to show for it is never bad. Actually, an hour in the shop is never bad, whether there is something to show for it or not.
Subscribe to:
Posts (Atom)


