fs
Showing posts with label router. Show all posts
Showing posts with label router. Show all posts

Tuesday, March 4, 2014

Brad’s Router Table



From: Brad Lockwood


Location: Stratford, CT


Hobbyist or Pro: Hobbyist


Project Name: Router Table


Wood Species: Birch Ply/Maple/Polar


Finish Used: Standard Stain with General Finish Dye stain, 3 coats of General Finish Wipe On Stain. I also used Shellac on the top.


Project Description:
This was my second project and I needed a good Router table. I wanted to see the effects of different finishes on different woods and what happens if I don’t do the light sanding after the water base stain. I also wanted to practice dovetail, rabbet joinery, inlay (t-tracks for the miter and fence). I also ordered and installed the Jessem Router Lift, which I bought after watching Marc’s router lift segment. Marc was right on with his analysis in my opinion.


As you can see from the full front photo, I fully integrated the dust collection using hose connected to the fence and a pickup from the router cavity. I placed plexi-glass on the door to the cavity and placed a light in there as well that turns on when the router is on. The very bottom door area is for storage. The left side drawers are sideless as I drilled holes to hold the bits. The Top right side drawer is a false front to hold the switch and the 3 lower drawers are half blind dovetails using the MLCS jig.


I learned a lot about finishing, dovetailing, drawer guide mounting and many other techniques as well. Now I have a top-of-the-line table and lessons learned. So as my friends say, this is the most furniture like router table east of the Mississippi.



Click Here and Start WoodWorking

Read More..

Monday, March 3, 2014

And still more router tables!

Paul Homes tells me the router tables with the pivoting fences are quite popular in Australia. He clued me into Gifkins, a web site that not only sells specialty jigs, but has free plans for a router table you can make yourself.(PDF) 


Next, head over to Martin Popes blog where he describes how he built his inexpensive router table. Check out his method for raising and lowering the router:
My low tech solution was two blocks of wood with a 45ish degree angle cut between them. A long slit was cut in one block into which a long bolt was passed through into a nut at the rear. As the bolt is turned it closes the blocks together which raises the router, screwing out the bolt lowers the router.
***


Mere Minutes




And now some more router tables!

******
Shawn Graham

Heres another router table for under $20. Shawn made this one from poplar with a plexiglass insert.







Erik van Baarle

A router table from the Flemish part of Belgium! Heres a good idea for the small shop. A bench-top router table that easily stores away. (Hey, thats my Workmate!)




Eddie Antley

This is one of the biggest router tables Ive seen. Looks like it doubles as a workbench.



Read More..

Sunday, February 2, 2014

Description Router table woodworking for mere mortals

Get Router table woodworking for mere mortals must see

Router Table Woodworking For Mere Mortals

Router table top and fence - woodworking for mere mortals, Free woodworking plans. easy woodworking projects. fun woodworking videos. woodworking for mere mortals.. Woodworking for mere mortals: free woodworking videos and, Free woodworking plans. easy woodworking projects. fun woodworking videos. woodworking for mere mortals.. Build a router lift - woodworking for mere mortals, Free woodworking plans. easy woodworking projects. fun woodworking videos. woodworking for mere mortals..

Router lift #034 : 3d woodworking plans, Best selling plan. shopmade router lift for anyone that always wanted a router lift, but just couldn’t justify the cost. this is your answer. the lift when. Steve ramsey - youtube, Ever think about making something out of wood? you can! woodworking for mere mortals is dedicated to making woodworking easy and fun. new woodworking video e. Too nice a router table - woodworking website | welcome to, That router table will be a wonderful addition to your shop. you did a fine job on it. helluvawreck aka charles http://woodworkingexpo.wordpress.com.

Sss table - scribd, Social security system table source: sss contributions table, revision january 2007 effective: january 1, 2007 (current). Make a simple woodworking box joint jig - youtube, Here is a simple jig for making box joints on your table saw. thanks to per almered who created the brilliant handy woodworking tip time jingle for this. Vintage pattern vendors - vintage sewing patterns, Complete list of vintage sewing pattern vendors some online pattern vendors are allowing their.



Useful Router table woodworking for mere mortals Best choice




Router table woodworking for mere mortals
,

9 out of 10 based on 12 ratings
Read More..

Sunday, January 26, 2014

My new router table

As I mentioned last week, I bought a new router table.  It came in a million pieces and took me about an hour to assemble. I used it to make some chamfers on a project on Thursday and it worked like a champ!  The new router is way more powerful then the one that came with the beginner table that I had previously.  I have all the pieces for another thumb chair that have been sitting around my shop for about a month so I got off my butt and made all the finish cuts and then put a 1/2" round over on them using the new router table.  The insert plate totally sagged and warped and all of my pieces got caught on the lip at one point or another.  The difference between the 2 days?  About 15 degrees hotter on the second day.  That was unacceptable so I took it back to Home Depot this morning.  I found a Craftsman router table with a die cast aluminum top on the Sears website on sale for $118 so I went to my nearest Sears and picked it up.  They didnt have the sale price on the shelf but I told the clerk that it was cheaper on their website and they price matched it.  I brought it home and started the assembly this afternoon.  It had many less pieces and went together in a few minutes.  It is about 6 inches shorter in length but probably half the weight.  From watching Steve Ramseys YouTube channel I knew that he had a Ryobi router in a Craftsman table so I figured there would be no problems.  I screwed with that thing for 20 minutes and couldnt get it to fit so it looks like I am going to take the router back tomorrow and go pick up a Craftsmen router.  I signed up for the Craftsman Club while I was there and they sent me a $10 off coupon for joining so I plan on using that on the new router.


This is the table I returned

This is the new one

Read More..